Your product,
tucked in.
Open a 3D model of what you sell, pick your box, and print two thin cradles that hold it in place.
IN DEVELOPMENT Not available yet. The app opens with the MakerWorld campaign.
How it works
- PANEL A
Open your model
STL, 3MF or OBJ. Read in your browser, never uploaded.
- PANEL B
Pick your box
Type the inside size of your mailer, or take the smallest one that fits.
- PANEL C
Print two cradles
A bottom and a top cradle, reusable. Filament and estimated print time are shown first.
For anything you sell
Only the cradles are printed. You need a 3D printer and a 3D model of the product: a design file, a scan or one from the manufacturer.
- 01 Ceramics and glass
- 02 Candles and soap
- 03 Electronics
- 04 Bottles and cosmetics
- 05 Figurines and models
- 06 Small goods
What you get at launch
- FIT
Fit presets
Snug, standard or loose.
- PARTS
Several products, one box
Arranged for you, or moved and turned by hand.
- PRINT
No supports
Plain vertical walls, or one spiral-vase wall.
- REUSE
Reusable
They lift out in one piece and pack the same product again: for storage, a return or the next shipment.
- PRIVATE
Your model stays with you
Read in your browser, never uploaded.
- FILES
Slicer files
3MF with settings for Bambu Studio, OrcaSlicer and PrusaSlicer, or STL for any slicer.
One vase, one mailer
The app's sample vase in a standard mailer, with the layout and fit it picks on its own.
| PRODUCT | Sample vase, 57 × 55 × 61 mm |
|---|---|
| BOX, INSIDE | 150 × 100 × 70 mm |
| LAYOUT | Grid · 2-line walls, standard fit |
| FILAMENT | 24.2 g of PLA for both cradles |
| PRINT TIME | About 41 min, estimated; your slicer's figure is usually longer |
| SAME BOX, FILLED SOLID | 1133 g |
Computed by the development version: Tuckpack 0.1.0, generator 2.
Ten layouts of thin walls
Walls rise to meet your product and stay low everywhere else. The app suggests a layout; you can switch.
STANDARD WALLS
-
Grid
Square grid. Flat-sided products.
-
Comb
Parallel ribs across the box.
-
Truss
Triangles instead of squares.
-
Sunburst
A ring ribbed to the box. Round products.
ORGANIC
-
Veins
Walls that branch out from the product.
-
Contours
Rings like a contour map, with bridges.
-
Cells
Irregular cells, three walls per joint.
SPIRAL VASE · ONE PRODUCT PER BOX
-
Cocoon
A shell that funnels down to the product.
-
Claw
A band with arms out to the box.
-
Ribbon
One wall winding round the product.
PLANNED · NOT AVAILABLE YET
Cardboard
Grid walls as flat profiles with half-height slots. Cut them on a laser or blade cutter and slot them together: no plastic.
How to get a licence
Tuckpack launches with a crowdfunding campaign on MakerWorld. It is not open yet.
- 1
Back the campaign
Opens soon on MakerWorld. Options and prices come at launch.
- 2
Get your code
Every backer receives a licence code.
- 3
Unlock downloads
Enter it in your Tuckpack account. A free account can try the app; the licence unlocks downloads.
Questions
ALL QUESTIONS- Can I use it now?
- Not yet. The app opens with the MakerWorld campaign.
- Does my product have to be 3D printed?
- No. Only the cradles are printed.
- Is my model kept private?
- Yes. It is read in your browser and never uploaded.
Coming to MakerWorld
Not open yet. Questions before launch: support@tuckpack.app